1-inch Pipe Clamp Mount for Underwater Thruster (ROV / PVC Frame), 3 mm Wall 模型预览

GrabCAD 模型信息

1-inch Pipe Clamp Mount for Underwater Thruster (ROV / PVC Frame), 3 mm Wall · 模型 418201

作者:Md Mohiuddin Maruf

3D-printable clamp that attaches a brushless underwater thruster to a 1-inch (25.4 mm) PVC pipe. It has an oval recess that locks the thruster’s mounting lug in place, plus three M3 screw holes. Full description This is a 3D-printable clamp for mounting an underwater thruster (the brushless motor with a 4-blade propeller and duct) to a 1-inch round pipe, such as the PVC frame of an ROV, AUV or other small underwater robot. Features: Closed ring with a plain, solid back side and no split. Ring inner diameter 25.8 mm (1 inch pipe plus 0.4 mm print clearance), with a 3 mm wall and a 30 mm length along the pipe. Oval front pad, 56 × 21 mm, running across the pipe. Oval groove (10.4 × 50.4 mm, 3 mm deep) that seats the thruster’s protruding mounting lug, with 0.2 mm clearance all round. Three M3 screw holes (3.4 mm) at 20 mm spacing, lined up with the three holes in the thruster’s lug. Each has a 6.2 mm counterbore for the screw head. Hardware needed: 3 × M3 × 10 mm screws. Assembly: Slide the clamp onto the pipe before you attach the thruster. Seat the thruster’s lug in the oval groove. Fit the three M3 screws through the clamp and into the lug. Print settings (recommended): Material: PETG or ABS for underwater use. PLA is fine for testing. Orientation: lying on its back with the pad facing up. No supports needed. Walls: 4 or more. Infill: 40% or higher. Layer height: 0.2 mm. Notes: Designed to fit the “Underwater Thruster Brushless Motor 4 Blade Propeller” model. If the fit is too tight or loose on your printer, adjust the ring clearance (0.4 mm) or groove clearance (0.2 mm) and reprint.

格式
STL
分类
3D printing、Educational、Robotics
标签
underwater thruster、rov、auv、thruster mount、pipe clamp
数据更新
2026-11-20T20:00:55Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。