GrabCAD 模型信息
12/12 · 模型 174181
This is 12/12 (Twelve over Twelve), my entry into the Repeat Robotics open PLAnt challenge. NOTE: This is my first time designing a plastic antweight so take the recommended settings with a grain of salt. Bar: solid, as many walls as possible Uprights: five walls, 15% All other Parts are at two walls, 15% These values were chosen based on slicer estimates and component weights, i will likely update them once i have actually built the robot physically. The robot is meant to use a large clamp as a weapon lock. All non 3D printed parts in this design can be found in the repeat robotics open plant bundle(see the attached .txt file). To aid with assembly, the plastites have been assigned a different colour in the CAD compared to the regular machine screws. Building this robot requires shortening of all three motor shafts as well as the M5 screw.
- 格式
- Text file、Rendering、STEP / IGES
- 分类
- 3D printing、Hobby、Robotics
- 标签
- battlebots、antweight、plastic antweight、combat robot
- 数据更新
- 2026-10-23T23:14:27Z
