13m Displacement Motoryacht 模型预览

GrabCAD 模型信息

13m Displacement Motoryacht · 模型 398949

作者:Markus Rewinski

With this draft I oriented myself by the steel build dutch displacement motoryachts. It's 13m long and should weight around 15 tons. As it's only 3,25 wide at the waterline, it should run quite economic at 8 knots with around 0,5l diesel per km. For hull-speed (10 knots) it needs 110hp. So a good motorization would be a 150hp Diesel like Volvo-Penta D3-150 (2,4l with 5 cylinders, only 300kg with gear unit). In the afterbody is place for a large cabin about the full width (around 12m²). In the front would fit a second, little smaller one. Engine fits under the deckhouse. The freeboard is quite high (>2m) and the keel could host some ballast, whereby it would be very ocean-going. I did not focus on good-looking design, but rather on best possible and simple way of building; for home-builders. The originals begin at 300.000,- Euros in this size..... Some details like a railing are still missing.

格式
STEP / IGES、Rendering
分类
Marine
标签
yacht、boat、motoryacht
数据更新
2026-11-02T13:21:57Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。