GrabCAD 模型信息
160W USB C Car Charger, QC5.0 · 模型 105152
160W USB C Car Charger, QC5.0 160W USB C Car Charger that supports PPS PD3.0 QC5.0 fast charging, 3 ports 100W+30W+30W Useful for charging modern low power draw laptops via USB Type C port. (i.e. Apple Mac M1, M2 laptops) Be careful and make sure your car 12V cigarette lighter port fuse will support 160 watt loads. 160W/12V = 13.33 Amps (So fuse should have a higher current rating than this. This rating can typically be found in the car manual.) https://www.amazon.com/dp/B09HTTSJLV Built-in intelligent circuit design protects against short circuiting, Certified RoHS, CE & FCC, Protects devices from overheating and over-current Multi Port Output Combination Mode: Type-C1 Output: 5V/3A,9V/3A,12V/3A,15V/3A,20V/5A （100W Max） Type-C2 Output: 5V/3A,9V/2.22A,12V/2.5A,15V/2A,20V/1.5A （30W Max） USB Output: 5V/3A, 9V/2A,10V/2A,12V/2.5A（30W Max） Type-C1 + Type-C2 + USB Output: 100W+30W+30W（160W Max） Supported Protocols: Type-C1: QC5 Type-C2: PD3.0 USB: QC3.0 Note: Output 100W power based on QC5 protocol, and needs to be used with Type-C to Type-C 100W fast charging cable. The Type-C1 Port is a buck-boost type, and the output voltage is 5V-20V; so the output voltage of the car is 12V, and it supports 100W (Max) output at 12V. Type-C2 Port 15V and 20V outputs are possible when input is 24V (large truck). Apply this product to vehicles with voltages of 12V-24V only, with voltages above 24V or else the product may experience irreversible failures. Please insert your device for charging after the car engine is started. Please don't charge big power devices to protect the device from being damaged from over-current usage.
- 格式
- SOLIDWORKS、Text file、Other、STEP / IGES、Rendering
- 分类
- Components、Electrical、Energy and Power
- 标签
- usb type c、qc50、car charger、usb c、160w
- 数据更新
- 2026-10-15T18:40:01Z
