19" 1RU Rack Panel for a MAX7219 Dot Matrix Display 模型预览

GrabCAD 模型信息

19" 1RU Rack Panel for a MAX7219 Dot Matrix Display · 模型 380309

作者:Patrick Felstead

A two-piece 3D printable panel for a standard 19" rack that holds a four-module MAX7219 LED display behind a smoked Perspex window. The sky blue upper and lower clamps retain the display from the rear, with two M3 screws per clamp. Three M5 socket head screws and nuts join the panel halves, with the screw heads on the display side of the joint. The images show clock and temperature previews and use two shades of gray to make the panel split easy to see. Bill of materials 1. 1 × right-hand panel with the display opening (panel). 3D print. 2. 1 × left-hand panel (panel LHS). 3D print. 3. 1 × four-module MAX7219 LED dot matrix display assembly. Purchase from AliExpress. 4. 1 × upper display clamp and 1 × lower display clamp (the two bodies in clamp - small). 3D print. 5. 1 × smoked Perspex window. Cut a 137 × 37 mm rectangle from 1 mm thick smoked acrylic sheet and fit it behind the panel opening, in front of the display. 6. 3 × M5 x8mm hex socket head cap screws for the panel joint. 7. 3 × M5 hex nuts for the panel joint. 8. 4 × M3 x6mm hex socket head cap screws for the display clamps. Can be controlled by an ESPHome or arduno code. ESPHome code on my github.

格式
Rendering、STEP / IGES
分类
3D printing、Electrical
标签
未标注
数据更新
2026-11-14T15:37:49Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。