20W 3D-printed flashlight 模型预览

GrabCAD 模型信息

20W 3D-printed flashlight · 模型 360639

作者:Arthur Goetzke-Coburn

A custom 3D printed flashlight with a mount that I designed for fun. It's as of yet untested, so print at your own risk. Thermals have been simulated and should be within spec, but once again, do at your own risk. To build you'll need the parts below, the printed body of the flashlight, and some M3 and M4 hardware, and some thermal paste. Parts list (excluding screws and printed parts): -20W COB led with 34mm mounting hole spacing (such as https://www.aliexpress.com/item/4001181722547.html?spm=a2g0o.9042311.0.0.26a74c4duEEYKm) -20W LED Driver (can be any as long as it fits, such as https://www.aliexpress.com/item/33039050417.html?spm=a2g0o.9042311.0.0.26a74c4duEEYKm) -Battery Management and Charging Board (4S, such as https://www.aliexpress.com/item/33062582527.html?spm=a2g0o.9042311.0.0.27424c4dnnfYqg) -12mm push switch (such as https://www.aliexpress.com/item/4001291695467.html?spm=a2g0o.9042311.0.0.27424c4dnnfYqg) - 4 18650 batteries (any) -xt60 female connector -2 25mm*50mm heatsinks (such as https://www.aliexpress.com/item/32552401023.html?spm=a2g0o.9042311.0.0.26a74c4duEEYKm) - approx. 110mm of 1/16*1 inch of aluminum flat bar (acts as the heat conduit from the LED to the heatsinks)

格式
STEP / IGES
分类
3D printing、Electrical、Tools
标签
3dprinting、led、electronics、diy、cad、tool
数据更新
2026-11-13T16:22:20Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。