GrabCAD 模型信息
36W Flameproof Fluorescent Emergency Linear Fixture - 220V, 50Hz - (2) 2' T8 Lamps - 3 Hrs - ATEX/IECEx · 模型 197188
https://www.larsonelectronics.com/product/257640/36w-flameproof-fluorescent-emergency-linear-fixture-220v-50hz-2-2-t8-lamps-3-hrs-atex-iecex The Larson Electronics ATEX-HALP-EMG-24-2L-T8-2X18W-R2 Flameproof Fluorescent Emergency Linear Fixture is designed for outdoor illumination in ATEX/IECEx rated flammable environments. Equipped with two, 2-foot T8 fluorescent lamps, this emergency 36-watt fixture is compatible with 220V AC, 50 Hz. The IP66-rated unit is constructed of glass fiber reinforced polyester with a polycarbonate lens and features an internal electronic ballast/inverter with an interlocking system for protection. The ATEX-HALP-EMG-24-2L-T8-2X18W-R2 is a powerful lighting solution for combustible facilities, industrial sites and outdoor locations. This 36-watt unit operates on 220V AC, 50 Hz and contains two, 2-foot T8 fluorescent lamps (2-pin G13 base). During use, the emergency fixture offers 2,380 lumens of output in a flood beam configuration, with an exceptional CRI rating of 75. Color temperature options include: 5000K, 4100K or 2700K. An electronic, internal ballast ensures reliable lighting performance and features two interlock switches that disconnects all poles to the ballast and inverter, as well as turns the power off when the diffuser is opened. This full-plastic explosion proof fixture is constructed of glass fiber reinforced polyester. The lens consists of UV-resistant polycarbonate and is equipped with a foam gasket. This IP66-rated unit comes with an approximate lifespan of 7,500+ hours and is suitable for ATEX/IECEx rated Zone 1/Zone 2 and Zone 21/Zone 22 flammable environments. Equipped with a T4 temperature rating, the outdoor fixture can be used in locations with ambient temperatures ranging between -25°C to +40°C. Battery-powered Emergency Backup: The flameproof light contains a battery backup unit that adds emergency light functionality to the fixture. With an electronic inverter, this fixture will continue to operate one fluorescent lamp for 3 hours at 1,190 lumens after the main electrical power to the light is severed. Once standard electrical power is restored, the emergency battery pack will be recharged, which takes approximately 24 hours from a drained state. The fixture contains three LED status lights for real-time monitoring in emergency mode: red, yellow and green. Wiring: The ATEX-HALP-EMG-24-2L-T8-2X18W-R2 features L1, L2, L, N and two PE terminals for completing electrical connections. Cables are fe...
- 格式
- Rendering、STEP / IGES、Other
- 分类
- Electrical、Fixtures、Industrial design
- 标签
- 未标注
- 数据更新
- 2026-09-14T11:20:02Z
