3D PRINTED BLOW MOLD CAVITY 模型预览

GrabCAD 模型信息

3D PRINTED BLOW MOLD CAVITY · 模型 357852

作者:Edgar Gidoni

This is one of the practical advantages of 3D printing. For years it has been used for prototype molding, both blow molding and injection molding, with low quantity runs but sufficient to evaluate new products, make improvements and start market studies. If you are a mold maker, here is a kit that allows you to interchange 3D printed inserts to make different bottles using standardized mold base and metal inserts for necks and strikers. In addition, by inserting a metal strip in the bottom, you can extend the life of the printed cavity. In this way, thousands of parts can be produced instead of hundreds. We hope this will be useful. By the way, there is a trick to keep one of the water circuits at the same distance from the cavity. See if you can figure it out.

格式
SOLIDWORKS、STEP / IGES、Rendering
分类
Industrial design、Miscellaneous、Tools
标签
3dprinmt、blowmold、edgargidoni、tecnicursos
数据更新
2026-11-15T11:31:43Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。