GrabCAD 模型信息
3M mask to DAR filter adapter [v5] · 模型 393688
[Now also available here with better formatting: https://www.prusaprinters.org/prints/28585-3m-mask-to-dar-filter-adapter] Adapter piece for standard 3M half-face mask (6000, 7000 and FF-400 series masks, eg. popular 6200) to DAR viral/bacterial filters commonly found in hospitals [Printing instructions can be found below] **UPDATE 06-04-2020**: 6200, 6800 and generic mask (eg. Sikko) adapters have been uploaded. 7500 version coming soon. If your adapter feels loose on the mask, try the "generic" version - it is meant to fit masks that have a looser adapter/thinner gasket than the original 3M ones. **UPDATE 05-04-2020**: v4 introduces model markings on the adapter - based on the feedback we've found different 3M versions & clones have slightly different adapter dimension. Please use proper version to ensure a tight fit. * DAR filter slot is now compliant with ISO 5356-1:2015 * Other adapter versions will be uploaded once verified (hopefully today) **UPDATE 03-04-2020**: v3 is a new revised version that introduces: support-free printing, side designation (R & L) and tighter fit for DAR filter according to ISO guidelines This is a revision of a project that has been circulating on the internet for the last few days and it aims to solve some of the issues present in the original design: 1. Rectangular, asymmetric design for easier handling when coupling/decoupling with the mask 2. Shape of the adapter offers instant visual feedback of the correct placement - former cylindrical version offers little to none, which can result in improper coupling and accidental disconnections 3. The filter has been directed towards the back and the sides, which offers several advantages: a. Air inlet has been directed away from the patient side, not towards it b. Upwards air inlet position is much closer to the intended use as described by the manufacturer's product specification c. Re-positioning of the filter allows for greater freedom of movement when a face shield is used 4. Wider flange offers extra seal around the adapter-mask interface, which was missing from the original design 5. Filter piece is inserted in a way that even accidental removal of the cap from filter's luer-lock port does not expose the user to unfiltered air Second filter can be replaced with a simple cap (will be soon added to the files) to reduce filter use - breathing is comfortable with even one filter. [PRINTING INSTRUCTION] 0.2 mm layer height, 3 walls, PLA or PETG, no ...
- 格式
- Rendering、STL
- 分类
- 3D printing、Medical、Tech
- 标签
- 3m、6200、mask、adapter、dar、hme、filter、covid-19
- 数据更新
- 2026-11-11T10:21:31Z