GrabCAD 模型信息
40×60 Wall Junction Cover · 模型 45079
Hager 40×60 Trunking Accessories – 3D Printable Series Hager 40×60 Wall Junction Cover – 80 mm Hole Cable Trunking T-Branch Trim (3D Printable, Snap-Fit, FDM) A 3D-printable trim element designed to mask wall openings where cables exit a wall through an 80 mm circular hole and immediately split into two directions using 40 × 60 mm Hager cable trunking. This situation commonly occurs when cables emerge through a drilled hole and are then routed left and right along the wall, forming a T-shaped trunking junction. The trim provides a clean visual transition between the wall opening and the trunking installation. The model consists of two separate printed components which are assembled after printing. Main features Designed for 80 mm wall openings (typical hole-saw diameter) Compatible with 40 × 60 mm Hager cable trunking Intended for T-branch trunking layouts where cables exit a wall Two-part design for easier printing and installation Snap-fit connection to the trunking using lid-retention geometry FDM-optimized geometry Supports generally not required Printing notes FDM / FFF printing Components printed separately Supports typically not required Small minimal supports can optionally be added under the snap-fit tabs that engage the trunking body. These supports are very small and easy to remove. Application The component is intended for installations where cables exit a wall through a drilled circular opening and immediately transition into trunking routed in two directions. The trim masks the wall opening and improves the visual finish of the installation. Educational purpose and regulatory note This model is shared primarily for educational and experimental purposes. Electrical installations are subject to local regulations, safety standards, and professional installation practices, which vary by jurisdiction. Any practical use of this model should be evaluated for compliance with applicable electrical codes and safety requirements. Open use The model is shared to encourage modification, improvement, and adaptation. Community improvements and derivative designs are welcome.
- 格式
- Fusion 360、Rendering、Text file、STL
- 分类
- 3D printing、Electrical、Tech
- 标签
- 3d-printable、electrical-installation、cable-trunking
- 数据更新
- 2026-09-21T04:55:24Z
