7 inch FPV quadcopter frame - "Flying dog" 模型预览

GrabCAD 模型信息

7 inch FPV quadcopter frame - "Flying dog" · 模型 389924

作者:Michael Smirnov

I have developed a frame, a single-axis(roll) stabilizer for the camera(runcam5/gopro session) with TBS ND filters and brackets for antennas and electronics. The advantage of the frame is the ability to make the frame on your own using a sheet of only one thickness - 2mm, for example, carbon fiber or textolite. The final weight of the carbon frame is standard for 7 inches - 140-150 grams. The frame is quite stiff compared to the X-frame. There are three configurations in the main assembly - the frame version 10, 9 and version 8. I'm flying on version 8 now, but version 10 is more optimized, I recommend using it. V9 not optimized for using Gopro or Insta360. The assembly uses other user's component models: https://grabcad.com/hendricks-1 (motors) https://grabcad.com/persopolo (tbs) https://grabcad.com/rene.jr.wollin (air unit) https://grabcad.com/aisak-2 (flight controller) https://grabcad.com/sergey.torshin-1 (ESC) https://grabcad.com/chris.ecob-1 (runcam) https://grabcad.com/hartvik.line-1 (battery) https://grabcad.com/morten.nielsen-15 (GPS) I must emphasize that other components are used on the real drone, but with the same mounting dimensions. If you are in Russia, we can help you with milling and 3D printing. If you like how my frame flies, you can donate any amount http://paypal.me/exkb PIDs settings I picked up using pid analyzer. I used this manual https://www.youtube.com/watch?v=OuZSiozHMt4 to calibrate P and D for pitch and roll. Yaw settings i take from 7inch inav preset. Tuned with 2307.5 1750kv motors and gemfan flash 7042: inav2.6.1 roll p50 i60 d33 pitch p61 i65 d35 yaw p50 i65 d0 Tuned with 2807 1300kv motors and gemfan flash 7042, but also perfect(after test flying) for 2507 1200kv: inav2.6.1 roll p40 i55d25 pitch p45 i60 d28 yaw p50 i60 d0 I have already flown over 100 battery charges on this frame(version 8). The frame survived several falls and did not break. !update! after more than 200 batteries)) The frame couldn't withstand some falls, but the use of a 2mm sheet and the vertical arrangement of the Arms greatly simplified the repair of the arms. Some of the photos show repair (some patches installed).

格式
SOLIDWORKS、Rendering
分类
3D printing、Hobby、Toys
标签
7inch、quad、quadcopter、fpv、runcam5、dji、quadrocopter、frame
数据更新
2026-11-18T17:14:09Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。