777 Series, 24 VDC explosion proof coil, twin leads, 1/2" NPT conduit connector, ATEX and IECEx certified - Model (777HN24AA). 模型预览

GrabCAD 模型信息

777 Series, 24 VDC explosion proof coil, twin leads, 1/2" NPT conduit connector, ATEX and IECEx certified - Model (777HN24AA). · 模型 380246

作者:Gorilla Auto-Academy

Sun offers explosion proof coils for use in hazardous environments. Certification requires the explosion proof coil to be sold as a complete cartridge/coil assembly. Coil cannot be purchased separately. For ordering information, please see the coil option section on the applicable cartridge product page. ATEX certified: II 2 G (See Additional Resources tab below) IECEx certified: Ex mb IIC T3 Gb (See Additional Resources tab below) This coil is CE compliant. Certification requires the explosion proof coil to be sold as a complete cartridge/coil assembly. Coil cannot be purchased separately. For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 80 - 250 Hz. Ingression protection rating is IP67. RoHS compliant. Restricted materials less than 0.1% total by weight. The external steel shell is zinc plated with yellow dichromate. The coil nut is zinc plated with clear dichromate. Non-resettable integral internal thermal and current fuse protected. No arc suppression diodes in coil. Coil windings utilize NEMA-MW-80, Class F (155 deg C) magnet wire. Coil must be installed on the cartridge with the proper orientation for proper performance. See drawing/instructions. Coil/cartridge assembly can be mounted in any position, however, coil orientation on cartridge assembly is critical. Arrows on coil label must face towards coil nut. Coil cannot be purchased separately and must be configured along with the cartridge valve. Please see the applicable cartridge product page for ordering information. Sun's explosion proof coil requires more clearance than 770 series coil. Sun manifolds with more than one cavity may not allow enough clearance for explosion proof coils. For proportional valve applications, the maximum current of 590mA has been established so a proportional valve can function optimally under a variety of ambient temperatures.

格式
PTC Creo Elements、STEP / IGES、Rendering、Other
分类
Electrical、Energy and Power、Robotics
标签
777series、24vdc、explosionproof、twinleads、nptconduit、atex、iecex、model777hn24aa、industrialautomation、hazardouslocation、valvecoil、safetycertified
数据更新
2026-11-18T03:48:38Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。