GrabCAD 模型信息
Abschlussring CS-HG50-10 Lock Ring Cassette Shimano · 模型 9693
Remix from https://grabcad.com/library/shimano-centerlock-disk-rotor-lock-ring-1 Locks the Cassette on the freehub. Update 2025, the thread specification (3d Modell not exact) The thread specification 1.2" x 24 TPI follows the imperial (inch) system, so let's break it down and convert it into metric dimensions: 1.2" (Major Diameter) This refers to the outer diameter (major diameter) of the thread. 1.2 inches = 30.48 mm. 24 TPI (Threads Per Inch) This means there are 24 threads per inch. To convert this to pitch (mm per thread), use the formula: Pitch=25.4TPI Pitch=25.4 24=1.058 mm =1.058 mm So, the thread pitch is 1.058 mm. Metric Equivalent: A thread close to 1.2"-24 TPI in metric terms would be approximately: Major diameter: 30.48 mm Pitch: 1.058 mm There is no direct standard metric equivalent (since metric threads usually have whole-number pitches like 1.0 mm, 1.5 mm, etc.), but this can be compared to an M30 x 1.0 thread (which has a very similar pitch).
- 格式
- STEP / IGES、Rendering、Fusion 360
- 分类
- Components、Hobby、Sport
- 标签
- deore、ring、lock、ritzel、shimano
- 数据更新
- 2026-07-30T17:34:19Z
