GrabCAD 模型信息
Additive Manufacturing CubeSat Design · 模型 258444
My CubeSat design is made of 4 parts to allowing the students easily costumes there CubeSat for any need. Part 1 is made of the support rails and the left, right, bottom, and back walls Part 1 is the frame of this CubeSat design and can only be 3D Printed The walls and the support rails are made from a simple pattern that can easily be scaled up from 1U to 1.5U, 2U,or 3U or any other size(Fig.1) The wall is made from complex curves and 1.5mm holes The hole can be used to put a hollowed rod( that can be screwed at both ends ) to support Motherboards or other components(Fig.2), also to pass wires through the holes to keep other wires from moving (Fig.3). The support rails are made from rods with a diameter of 1.5mm They can be used to attach solar panels outside the CubeSat Part 2 the front wall it slides into the front of part 1 (CubeSatFront) Part 3 the top wall It slides into the top of part 1 and keeps part 2 from sliding out (CubeSatTop and CubeSat4) Part 4 is a bolt It goes in part 2 to keep part 3 from sliding out (CubeSat2) This design should be printed through DMLS in Aluminum Alloy for its Good Thermal Properties and Low Weight(1U about 150 grams in aluminum alloy) I apologise for not including the STL for CubeSatFrame.SLDASM file because my computer doesn't have enough ram to make it.
- 格式
- Rendering、STL、SOLIDWORKS、SOLIDWORKS、Other
- 分类
- 3D printing、Aerospace、Educational
- 标签
- cubesat
- 数据更新
- 2026-09-10T11:53:53Z