GrabCAD 模型信息
Anet A8 linear Rail Y Axes Update · 模型 352018
Anet A8 linear Rail Y Axes Update This is a complement for https://www.thingiverse.com/thing:4276157 All the parts were designed in solidworks 2018, upload in this page. But if you need another type of file tell me and I will try to help you. Parts: 6x2020 350mm Aluminum Profile or 2x2020 350mm Aluminum Profile https://www.aliexpress.com/item/32813616949.html?spm=a2g0s.9042311.0.0.391b63c0YlSumu or 2x2020 350mm Aluminum Profile if you only put the lienear rails (like on the picture below) 52xNut Fasten Connector 2020 Aluminum Extrusion https://www.aliexpress.com/item/32814359094.html?spm=a2g0s.9042311.0.0.274263c0RXo8bT 52xM3x6mm Alloy Steel Screws https://www.aliexpress.com/item/4000027503852.html?spm=a2g0s.9042311.0.0.274263c0RXo8bT 8xAlloy corner 20x20x17mm https://es.aliexpress.com/item/32922071230.html?spm=a2g0s.9042311.0.0.274263c0fEiQ3M 8xM3x16mm screws For Mesa_union_rieles_v1.STL 2xM3x30mm screws + nut + 2 x washers For Y-Belt-Holder-GT2_Horizontal_V21.STL 2xM3x10mm screws Tensor_Y_v1.STL 2xM3x14mm screws Soporte_Y_endstop_v1.STL 12xM3x14mm screws+ washer (Nema 17 step motor) Soporte_motor_v4.STL 6xM5x8mm screws Soporte_motor_v4.STL This update it is vey simple to make in your Anet A8 because the only thing that you need todo is print this parts and change the Y axes fron your Anet A8. One thing ofr these aluminium parts is that you need to make a 90º angle very accurate, and when you has all parts of the frame un perfect place then you must to press the screws. In may printer also I update the y axes and the exterior frame and the result is amazing for few dollars. Befor this update all the time I wasted time in calibration axes but now nothng at all.
- 格式
- SOLIDWORKS、Rendering、STL、STEP / IGES
- 分类
- 3D printing、Hobby、Miscellaneous
- 标签
- anet、a8、linear、rail、axes、update
- 数据更新
- 2026-11-14T05:56:06Z