GrabCAD 模型信息
Apex - A 3D printed marble machine · 模型 296335
Introducing Apex—an entrancing 3D printed marble machine. Watch the marbles carefully as the spiral lifts them up, and they weave down a plinko board, stairs, and various other tracks. The machine uses 8mm or 5/16" marbles (the distinction is negligible), but can be scaled up proportionally to use larger marbles. Video: https://www.youtube.com/watch?v=76Xtjbtv-K8 If you like marble machines, check out some of my other work! https://elegantmachines.etsy.com Dimensions: -Length: 6.75" (170mm) -Width: 5.75" (150mm) -Height: 5.5" (140mm) *Please ensure ball bearings are out of reach for children under 5, as they present a potential choking hazard. Note that the 8mm ball bearings are considerably smaller than normal marbles (which allows the design to be more intricate). Print settings No supports are required for any of the four files. A layer height of around 0.16mm (or 0.2mm) is recommended, at least for the main machine. A printer bed size of at least 170mm x 170mm X 140mm is needed. I suggest a slow print speed for the main machine due to its intricate internal supports. While I strive for utmost file quality, minor variations inherent to 3D printers may result in slight imperfections in the final product (typically easily fixable, in my experience). Uses about 250 grams of filament in total. The story I designed this machine over the summer of 2023. Surprisingly, the failure rate (number of marbles that fell out or jammed / number of marbles cycled) was only 0.4% for the first version of the design--not bad! I raised a few walls, added a few supports, and made the track steeper in a few places; the second iteration had a much better failure rate of 0.06%. Still, that wasn't up to my standards (below 0.02%). Fortunately, the third version did meet standards; it had no failures after cycling 20,000 marbles. Still, I didn't stop there. Since then, I've optimized the design further, cutting out unnecessary supports, reducing filament usage, and reinforcing various sections. As of December 2023, I'm on the eighth version of this design, and I still have ideas for micro-optimizing it.
- 格式
- STL、Rendering
- 分类
- 3D printing、Hobby、Just for fun
- 标签
- fun、kinetic art、gift、desk toy、marble race、gravitrax、marble run、marble machine
- 数据更新
- 2026-10-20T11:40:26Z
