GrabCAD 模型信息
Artemis Cargo Challenge · 模型 115303
This project was carried out as part of the challenge proposed by Nasa: "Lunar Gateway Cargo Packing and Storing". The challenge asked for a number of storage boxes of predefined sizes to be organized inside a model of the structure where they will be housed to support the astronauts during the Artemis mission. Thus, the concept adopted for this project was to create eight successive rings of the aforementioned boxes, some of which would also have concentric rings inside, leaving a free central corridor of 0.8*1.1m for the astronaut to pass through. Two of these rings of boxes would be placed in the copular zones (ends) and the others in the cylindrical zone (center) of the storage capsule. Each box in the copular zone would be connected by a 3M Dual Lock Reclosable Fastener to one end of the semi-monocoque structure that would be placed inside the central area of the capsule and in which there would be guides that would allow three separators (in a sandwich structure), placed inside, to move. These separators would also be connected to the ring housings in the cylindrical area (two rings per separator) using a 3M Dual Lock Reclosable Fastener. Their movement would be supported by a Vevor 1200kg 12M motor. Connected to this would be a hook, which the astronaut would attach to the separator on which the box he wanted to access was located. The motor would pull it so that the necessary space could be opened so that the box could be opened or removed. This project was made by Bruno Pereira, Gustavo Saturno, Beatriz Gonçalves and Pedro Quintal. We are all studying Aerospace Engineering at University of Aveiro.
- 格式
- SOLIDWORKS、Other、Rendering
- 分类
- Aerospace、Components、Construction
- 标签
- nasalunargateway、cargo packing and storing、nasalunargateaway
- 数据更新
- 2026-09-30T03:17:22Z
