Bagless 3D Printed Ventilator 模型预览

GrabCAD 模型信息

Bagless 3D Printed Ventilator · 模型 338413

作者:James Zaremba

For a novel virus there is a novel ventilator! The operating principle can be seen in the diagram uploaded, the basic premise is that the water contained in the base acts as a piston. When the moving head piece is driven up the rack by the 2 motors there is negative pressure created in the chamber which draws in air and oxygen through the one way inlet valve. When the motors spin the other way and retract the head piece into the base the air in the chamber is forced out of the outlet valve (i'm sure many of you have seen on countless ventilator designs) into the patients lungs. The only parts that aren't 3D printed are the valves, DC motors and corresponding securing screws. I aimed to make this design as easy as possible to print and assemble, all that is required is plumbers pipe adhesive or a solvent based adhesive. The only parts that require gluing are the rack, motor brackets and valves. Unfortunately, I don't have access to a 3D printer so i cannot prototype it but I have attached all of the design files so I encourage anyone who is interested to have a go and document their results. This is the motor used https://uk.rs-online.com/web/p/dc-geared-motors/8347631/ and the mounting screws are 6mm long M3 Pan Heads.

格式
SOLIDWORKS、Rendering
分类
3D printing、Machine design、Medical
标签
covent19round12020
数据更新
2026-11-11T19:43:49Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。