GrabCAD 模型信息
Bi-directional, direct-acting relief valve - RBDALAN · 模型 123853
The bi-directional, direct-acting relief cartridge is a normally closed, pressure-limiting valve used to protect hydraulic components from pressure transients. When the pressure differential between ports 1 and 2 exceeds the valve setting, the valve starts to open, throttling flow to limit the pressure rise, regardless of the direction. Capacity from port 1 to port 2 is 25 GPM (95 L/min). Flow from port 2 to port 1 is rated at 10 GPM (40 L/min). Recommended minimum setting is 1200 psi (85 bar). Note: At settings below 1200 psi (85 bar), the valve is rated for maximum transient flows of 25 GPM (95 L/min) only. Because the modulating occurs inside the cartridge, these valves are immune to most of the problems associated with cavitation, namely noise and manifold erosion. The seals on the adjust screw are exposed to system pressure which means this valve can only be adjusted when the pressure is removed. The setting procedure is; check the setting, remove the pressure, adjust the valve, check the new setting. Valve is relatively insensitive to varying oil temperatures and oil borne contamination. Select a spring range where the desired relief setting is approximately mid-range to high between the minimum and maximum pressure to ensure maximum valve repeatability. Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
- 格式
- STEP / IGES、Rendering、Other
- 分类
- Electrical、Energy and Power、Robotics
- 标签
- quietoper、smoothoperation、fastresponse、t10acavity、transientprotection、bidirectionalprotection、crossportrelief、pressurelimiting、normallyclosed、hydraulicvalve、pressurecontrol、sunhydraulics、rbdalan、directactingreliefvalve、bidirectional
- 数据更新
- 2026-10-13T10:33:50Z
