GrabCAD 模型信息
Binglider 1.0 · 模型 213562
Made a 2m wingspan V-tail glider using mostly parts from hardware store. Here's the model for overall dimensions. Wings: Knauf Insulation 1200 x 600 x 30mm XPS Multi-Use Foam Board Fuselage: 40mm PVC pipe (filed & sanded to remove wall thickness) Motor: Turnigy GliderDrive SK3 Competition Series - 3850 - 3.5 1400kv Not shown in model: > Wings are two-piece, with an approx. 10mm dia aluminium tube set into each wing half using Gorilla Glue (Sikabond Techgrip Polyurethane) then a wooden dowel inserted during assembly. Carbon fiber would be better/lighter. > EmaxES08MDII servos used in wings for ailerons/flaps, carved recesses into wings using dremel & glued into place > 3D printed hinge-points for ailerons/flaps > Carbon fiber rods epoxied thru fuselage used for mounting rear Ruddervators > carbon fiber pushrods for rear control surfaces. https://youtu.be/6YsD6fX3IYY https://imgur.com/a/FdQjirH https://youtu.be/l7ZsBARjs8Y
- 格式
- Autodesk Inventor、Other
- 分类
- 3D printing、Aviation、Hobby
- 标签
- 未标注
- 数据更新
- 2026-10-16T20:36:54Z
