Block build plate - 4 way intersection 模型预览

GrabCAD 模型信息

Block build plate - 4 way intersection · 模型 372180

作者:Seymore Franke

This build plate is approximately 10x10in [250x250mm] and based on the well known product which can be printed for a fraction of the cost. The peg dimensions seem to be dependent on the extrusion temperature so I printed a small section first to determine fit which for me was PLA 198C and 50C. Concerning printing: Default settings in my slicer offered a 13hr print time. I was able to print in 4hrs by increasing the print speed to 150mm, reducing the accelerations to 50% and by printing two layers each top and bottom, 25% lines infill, six lines of wall on .3mm layers. What this does is print the big square in two skins with alternating 25% inside lines. The bumps are all printed solid (six lines of wall) which is much faster than infilling the bumps. My magic temps are still 198C / 50C PLA for a solid snap fit to building bricks.

格式
STEP / IGES、STL
分类
3D printing、Hobby、Toys
标签
lego brick block build plate platform
数据更新
2026-09-22T10:35:35Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。