GrabCAD 模型信息
Brass Insert Soldering Insert Rig (for 3D Prints) · 模型 357314
I made this a few years back and it works pretty well to this day. It just a 2020 bar and the readily available V-wheel square open builds style plate. Add some 3d printed parts and you have a nice soldering iron press that can create repeatable inserts. I never actually used the handle on the side much and ended up removing it. The top handle is pretty useful though make sure your print oreintation is flat for more strength and a high infill/wall count. the rigidity comes from the through hole and the topside support. Use a Forstner bit to create a snug fit. and if you have a router to channel out the under clamp that helps. then it should be very rigid and just check for vertical and your good. Make sure to use a base that is big enough and thick enough so it has a bit of weight too it. If its too light then it wont be as steady i made this mistake using 10mm ply on my first go. Some kind of Rubber feet help alot The wheel gets threaded with some nylon line and i use a spring on the underside of the wood board to create tension. its probably overkill as you can adjust the tension of wheels they have an eccentric part for alighment... 😅 I borrowed from a couple other people on here for insperatiomn; the handle and the soldering clamp but made tweaks as per my requirements. Unfortunately i cant remember who they are to credit them.
- 格式
- STEP / IGES、Rendering
- 分类
- 3D printing、Machine design、Tools
- 标签
- brass、inserts、fusion360、2020、3d printing、metal fittings
- 数据更新
- 2026-11-08T16:32:40Z