Brutal DIY Lathe :-) 模型预览

GrabCAD 模型信息

Brutal DIY Lathe :-) · 模型 358377

作者:Bekjan Amantur

STATUS: DRAFT My first lathe project. Please do not take some decisions to heart because I have no practical experience working on a lathe, only video clips on YouTube) The main idea is a wide bed, compared to the same Chinese WM210V-400 lathe. Most of the finished production parts, for example: Scroll chuck Spindle from WM210V Bearings 30309 Spindle nuts M45x1 Rails and carriages of standard size HG20 Set of ball screw feed SFU1204 350mm and SFU1605 600mm with BK/BF10/12, KFL08 and couplings 10x8 and 8x8 Motors Nema23 112 57BYG250-H Small longitudinal feed from WM210V The tailstock is from some machine with a quill offset of 50mm Otherwise, the main material of the frame and spindle box is ordinary ferrous metal with a thickness of 10 mm (in the spindle box for bearings 30309 a thickness of 22 mm is used). The method of connecting to each other is a groove-joint and holes between them. It is positioned at the joints, tacked by welding through the holes and the joints are welded. Bed Wide - 225mm, there is a middle rib for reinforcement. The top sheet has a slot at the rib, used to fix the tailstock. It is possible to concrete the entire cavity of the frame (except for the travel space of the tailstock clamp) if such a need arises. Spindle box Attached to the frame with 4xM8 bolts, it can be adjusted in 4 directions. The driven pulley is a custom one from a set of 5mm sheet iron for a V-shaped belt (a super non-final solution, as well as the absence of a motor and gearbox in the diagram). Tailstock The mount allows you to adjust the axis only in the vertical axis; the horizontal axis is adjusted using the spindle box, which I don’t really like at the moment either. I can't find a suitable tailstock for my project. Caliper The base on 4 carriages as well as the longitudinal feed, all this gives a greater height above the bed and the maximum possible diameter of the surface being turned. But here I’m more worried about the increased chance of vibration during turning. There is space on the support to the right of the rails for an optical ruler type KA300-170 and for longitudinal feed KA300 520 The movement is carried out by a Nema23 motor directly connected to the sfu1605 through a coupling Small longitudinal feed It is mounted on a circle that can rotate 360 degrees and is fixed with 4xM6 bolts. Also, the small longitudinal feed itself can be fixed on the wheel in the “left position”, i.e. to the left of the caliper, the tip of the cutter will stick

格式
STEP / IGES
分类
Industrial design、Tech、Tools
标签
未标注
数据更新
2026-11-12T08:56:09Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。