Camera body for D3Eng-DesignCore-D3CM-IMX390 模型预览

GrabCAD 模型信息

Camera body for D3Eng-DesignCore-D3CM-IMX390 · 模型 379237

作者:sanek

The case is a sealed product, made of aluminum brand AMg6. Because It is corrosion resistant and relatively durable. The design of the body will allow you to make a convenient replacement of the lens. The camera body consists of: 1. Shells It is a bent sheet, welded along the joint and processed from the ends. 2. front cover It is both a lens adapter and board mount. On the mating surface of the shell is a groove in which the seal is placed. Also on the lid there are petals for fastening the lid to the shell through the bar. For greater economy, the front cover can be made more economical by separating the rotation boss (lens adapter) and the platform. When screwing the lens into the cap, apply sealant to the threads. 3. Plank Planck is an aluminum bar of rectangular cross section, which is welded to the aluminum shell. After the assembly process, 3 holes are drilled in it on each side for connection with the housing covers. 4. back cover Almost a copy of the front cover, but instead of the lens will pass the cable. A half-open groove for installing a circular seal, which is tightened by a shank, is located around the cable hole. 5. Shank It presses the gasket to the back cover and is a detachable fakr connector. It is made of welding 3 parts. To assess the tightness required to conduct tests. For welds using kerosene test method. For seals, lowering into a bath of water or hydrotesting at a pressure of several atmospheres. For the strap and hermetic seals no drawings are given.

格式
SOLIDWORKS 2016、STEP / IGES、Rendering、Other
分类
Electrical、Just for fun、Tech
标签
未标注
数据更新
2026-11-08T07:05:01Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。