GrabCAD 模型信息
Capacitor mount for the Apex Evo Frame · 模型 41364
WARNING: Your solder joints on the CappyCap will be very close to the standoff. The V2 models will give you +1mm more clearance here. They likely won't touch on install, but as the quad tumbles and experiences chaos while crashing, it's possible they could. Insulate those solder joints with E6000 or at least electrical tape. This capacitor mount situates the capacitor horizontally aft of the stack. It is suitable for both Panasonic EEU-FR1V102 (35V) and Panasonic EEU-FR1H471 (50V) capacitors. Please use a B2FPV CappyCap and connect with motor wire trimmings rather than the solid leads from the capacitor itself. Version 2 models are supplied for both Genuine Impulse and SoloGood copies. The SoloGood models are made for standoffs that are +2mm taller.
- 格式
- STL、STEP / IGES、Rendering
- 分类
- 3D printing、Hobby
- 标签
- capacitor、evo、apex、impulserc、fpv
- 数据更新
- 2026-09-10T12:44:21Z
