GrabCAD 模型信息
Card Holder Stand · 模型 60492
A tiny card stand for small cards up to 80 mm tall. Print one to prop a card up, or print a mirrored pair and clip one on each side for a stand that actually stays put. WHAT YOU GET - Sprung clip grips the card while the triangular foot stops it tipping backwards - Use one on its own, or print a mirrored L/R pair and clip one on each edge for a much more stable stand - One piece measures 25.4 x 40.8 x 25.2 mm and uses almost no filament - Bundled 3mf is a complete L + R set on one plate, laid flat, no supports - Prints in well under an hour for the full pair FIT CHECK - Sized for small cards up to 80 mm tall - photo cards, business cards, place cards, small greeting cards - Card thickness works best from about 0.3 mm up - Thinner than 0.3 mm can feel loose in the clip - slip a second card in behind the first so the spring stays compressed - One unit props a card up fine; two mirrored units on both edges is what makes it stable - Every photo is the actual printed part, no renders PRINT SETTINGS Bambu Lab P1S with a 0.4 mm nozzle, stock 0.2 mm Standard profile. - PETG recommended - the clip is a spring, and PETG holds its springiness far longer than PLA - My test prints are PLA (Bambu PLA Matte) and work fine, they just relax over time - 0.2 mm layers / 2 walls / 15% infill - Supports: none - the parts lie on their side in the bundled 3mf - Need the pair? Print the STL twice with one copy mirrored, or just slice the bundled 3mf NEED A DIFFERENT SIZE? STEP file is included, so you can widen the clip slot for thicker cards or scale the foot for taller ones. LICENSE: CC BY-NC
- 格式
- STEP / IGES、3D Manufacturing Format、STL、Rendering
- 分类
- 3D printing、Household、Interior design
- 标签
- desk organizer、place card、business card、photo card、card stand、card holder
- 数据更新
- 2026-09-30T17:57:41Z
