GrabCAD 模型信息
Channel Slot · 模型 281950
>First, I started by sketching on the front plane, the top and bottom rectangles to 95X104. >Next, I made a center rectangle in between the top and bottom rectangle, made a small line on the left side of the whole design, added angled lines to make it 45 degrees for the top and 315 degrees for the bottom rectangle. >Then, I added boxes in the top right and bottom left corners and I trimmed the rectangles to the shape of the blueprint. > Afterwards, I created the two slots in the middle of the top and bottom rectangle, smart dimension the outer slot and made another slot inside the first one. > Next, I extruded the bottom rectangle, then the middle rectangle to 6mm. After that, I made another plane that was 8mm that extruded my drawing. >Then, I had to outline my drawing in order to extrude the rest of my drawing. I also had to make another plane to 8mm to extrude more of my drawing. > Afterwards, I had to make another plane to 8mm to extrude and finalize the rest of my drawing. >Lastly, I changed the material to Cast Alloy Steel and measured the mass. I had to re-evaluate my mass.
- 格式
- Rendering、SOLIDWORKS
- 分类
- Computer、Industrial design、Machine design
- 标签
- stc_cad_cs
- 数据更新
- 2026-09-10T13:14:46Z