GrabCAD 模型信息
CNC 4th Axis using Harmonic Drive and Angle Plates · 模型 358152
This is a low cost (~$600) DIY 4th axis design which maximizes precision by using off the shelf precision ground cast iron angle plates. Cast iron also have the benefit of being a great vibration dampener. The design is made for a Tormach 1100 bed specifications, and the height fits their "tall" tailstock. I wanted a beefy 4th axis that had no backlash. The strain wave gearboxes used on 6 axis robot arms appear perfect for this application, but they exceptionally stiff in torsion. To increase the stiffness, I went with a larger "32" size Harmonic Drive gearbox. (2x the stiffness of a "25" size, and 4x the stiffness of a "20" size) Used units are around $300. For the frame, I wanted to minimize the cost and maximize the precision. I found a 10" x 10" angle plate for $130. The ribs in my angle plate were narrower than in the model I downloaded from Shars, so this design will work with narrower 160mm spaced rib models of plate as well (but you'll have to deep bore some clearance.) With the 50:1 reduction gearbox and a 2:1 reduction pulley this machine will produce 20,000 steps per rotation or 0.018deg per step. At maximum speed this machine will produce around 10rpm at the chuck. Total mass for this machine is ~36kg or ~79lbs. Harmonic Drive shg-32-50-2uh "32" size, 50:1 gear reduction 4.5kg mass (Ebay or new from a distributor) Nema 34 Stepper Motor (8.5Nm) 5.5kg mass (Any source) 5M 50T timing pulley https://www.amazon.com/dp/B0BGF3M7G5 5M 25T timing pulley https://www.amazon.com/dp/B09BFB8KK9 365T 5M timing belt https://www.amazon.com/dp/B09KBN4NF1 10"x10" plain angle plate 23.85kg mass Good price at cme-tools.com Two 2"x2" plaint angle plates 0.78kg mass https://www.amazon.com/dp/B00N40Y5T0
- 格式
- STEP / IGES、Rendering
- 分类
- Fixtures、Machine design、Tools
- 标签
- 4th axis、cnc、milling、harmonic drive、rotary table
- 数据更新
- 2026-11-10T07:23:49Z