GrabCAD 模型信息
Cover For SDS MK4i Swerve Module · 模型 262053
Enclosed cover for the Swerve Drive Specialties Mk4i. Designed by and used by Team 308 Monsters for the 2025 FRC season. Features - Separate mounting plate for two SPARK MAX Motor Controllers, allowing the cover to be removed without having to disconnect the motor controllers. - Slot in the rear to allow the cover to be removed without disconnecting the encoder wire. - The cover mounts directly to the module for a seamless and sturdy connection. - Zip tie slots around the top of the cover for wire management. - Motor access holes for easy motor removal. - Designed to be easy to print. Designed for use with NEO Brushless Motors; other motor configurations are untested. Materials: - ~200-250 grams of filament (~900-1000 grams for a set of four) (I recommend ABS, but most anything should work.) - x8 M4×6×6 Heat-set inserts (32 for a set of four) (Specifically, I used THESE other sizes will likely need the installation holes to be modified.) - x8 M4×12mm bolts (32 for a set of four) - x2 10-32x½ inch bolts (8 for a set of four) Made in Fusion 360.
- 格式
- Rendering、STEP / IGES
- 分类
- 3D printing、Robotics
- 标签
- robotics、mk4i、sds、swervedrive、first、frc
- 数据更新
- 2026-10-28T10:39:47Z