GrabCAD 模型信息
Delta Rocket - RC Glider or EDF Jet · 模型 299354
this is a delta rocket that you can power with a size A rocket engine. this can be converted to a glider by adding a servo for each ailer, a receiver and a 1s or 2s battery. this can also be converted to an edf jet when the plans are scaled up to the desired edf size. Notes: For use as a rocket/glider; - you do not need to use the cable cover, the ducts or the exhaust. - Use a size A rocket and this should get you about 100m up. -If u have servos setup, you can fly the model back down to earth. For EDF purposes: -you will need to use all the pieces. -scale up the plans and print to desired measure. When Printing: -Be sure to print all pieces standing and on angles that make it easy for your style of printer. - I printed this model at 100 mm/s - 0% infill - 0 top/bottom thickness - 0.4 up to 0.8 for the shell 0.4 was better for flying 0.8 was better as a rocket only model. -Bed Heat = 65c -Extruder Heat = 200c -Printed with a brim of 5 layers.
- 格式
- STL、Rendering
- 分类
- 3D printing、Hobby、Just for fun
- 标签
- ducted、edf、glider、printed、fan、jet、3d、rc、rocket
- 数据更新
- 2026-09-10T12:21:57Z
