GrabCAD 模型信息
Desk Fountain · 模型 298145
This project is a fountain that can be put on a desk or other places. It requires no motors or other electrical devices. All that is needed is the 3D printed fountain and some water. It is printable using PolyJet or FDM. Since this fountain needs to hold water it is suggested to customize the printing process. It can be printed by increasing the infill percentage to 30% or above, having the bottom 10 layers to be solid, having it printed on high quality, and having the walls be five or more layers thick. I would also suggest printing the fountain with ABS. After the fountain is printed, pour some water in the top section. Let the water flow down through the hole in the bottom. Then pour some more water into the top and water should start coming out of the nozzle. If not, put a thin layer of caulk or another sealant around the outside of the fountain to seal any holes or gaps. With this Desk Fountain, you could use it as a decoration and have it constantly run, or another option would be to have it on your desk while you work. The fountain will make the sound of trickling water, like a stream. Tyler Wahle Immaculate Conception School in Columbia, IL
- 格式
- STL、Rendering
- 分类
- 3D printing、Just for fun、Miscellaneous
- 标签
- extremeredesignengineeringsecondary2019、fountain、desk
- 数据更新
- 2026-10-31T06:06:30Z
