GrabCAD 模型信息
Dual cushion lock assembly with flow dividers - YCBILANAJ · 模型 123786
This assembly is a combination of the cushion lock circuit and flow dividers. It provides flow division to two actuators in both directions. It provides overrunning load control in both directions. It provides cross-port relief protection. It provides thermal relief protection. It supplies make-up oil. It flushes hot and dirty oil out of the actuators. The counterbalance valves should be set at 1.3 times the maximum load induced pressure. Operating characteristics cause the leg of the circuit with the greatest load to receive the higher percentage of flow in dividing mode. If a rigid mechanism is used to tie actuators together, the lead actuator may pull the lagging actuator and cause it to cavitate. Below the minimum flow rating there is not enough flow for the valve to modulate. It is effectively a tee. If flow starts at zero and rises, there will be no dividing control until the flow reaches the minimum rating.
- 格式
- PTC Creo Elements、STEP / IGES、Rendering、Other
- 分类
- Components、Industrial design、Robotics
- 标签
- mobilehydraulics、industrialautomation、valvetechnology、hydraulicsystem、motioncontrol、hydraulicengineering、loadholding、industrialhydraulics、hydrauliccontrols、hydraulicassembly、ycbilanaj、flowdivider、cushionlockassembly、dualcushionlock
- 数据更新
- 2026-10-16T17:08:13Z
