GrabCAD 模型信息
E-flite 25-46 90-Degree tricycle electric retracts · 模型 213245
STEP files for the E-flite EFLG330 Tricycle 25-46 landing gear set. This covers the regular 90-degree main gear set as well. These are dimensionally accurate on the exterior dimensions, mounting holes, wire locations, pivot points, etc. The interior dimensions are not accurate. - All rights are retained by the named manufacturer or distributor. All use of these models is solely to assist in the use of their products in your application. This model information is not provided for reverse engineering or manufacturing purposes. - These retracts appear to be good quality however I noticed a few things: 1. The included Allen keys are junk. Throw them away and don't attempt to use them. You will possibly damage the set screws beyond use if the included Allen keys are utilized. 2. The precut flats on the struts for the set screws could be as much as 5 to 10 degrees out of alignment with the strut coils. This may not be an issue unless gear doors are utilized. You may have to cut the flats deeper at the proper angle. 3. The potting compound on the circuit board may extend beyond the aluminum frame. On the main retract units this may not be an issue. On the nose gear unit this could interfere with the mounting surface. Make sure you take this into account. Autodesk Inventor files are also provided in case you would like to import those for further modification or analysis.
- 格式
- STEP / IGES、Rendering、Other
- 分类
- Aerospace、Aviation、Hobby
- 标签
- eflg330、e-flite、rc、retract、eflite
- 数据更新
- 2026-10-24T23:27:47Z
