EKWB EVO - Alphacool DC-LT Combo v1.4 DC-EVO 模型预览

GrabCAD 模型信息

EKWB EVO - Alphacool DC-LT Combo v1.4 DC-EVO · 模型 335553

作者:Simon Uzoni

v1: First version of a EVO-DC-LT Combo for space saving. It is not yet ready for use, i need to double check alingments with holes and do some minor and major editing before a functional version is available. The material that is meant to be used is acrylic but i will might do a copper alternative to shave of some height and make it fit better in SFX builds. Update: v1.1 Changed the size from 58.5x58.5mm to 60.5x60.5 to better fit the modified original EKWB acrylic top. reduced flow restriction by moving inlet and outlet tubes closer to the edge. Built for 2mm o-rings instead of 2.2 to allow for better construction around tubes and reduced flow restriction. shaved of a few mm from the height. v1.2 Close to a final version lowered the flow channels on the original EKWB top from 5mm to 4.2mm to be more similar to the copper base. Changed the inlet and outlet port from the top to the sides. increased the overall height to 49.3mm (54.9mm with copper base and no fittings). decreased the seat for the pump from 11mm to 10.5mm. thinned down the pump housing from 10mm to 7.9mm. v1.3: All parts of the block mount symmetrical on the original EKWB top cover. Added m3 screw holes for the pump and the rest of the parts: May need a weird length on some of the screws. To mount the pump two m3x8mm screws are needed. rounded of the inner inlet to the pump. aligned the pump with the pump housing. changed the name on the parts to be more understandable. V1.35 Removed threading so there is only threading on the top part instead of almost every one. Improved internal alignment for water channels. I reclaim my statement about it being ready for use, there is still some improvements needed to be done. v1.4 - Ready prototype. The channels for water transport are aligned correctly. Added placements for o-rings. The pump/cpu block combo is designed to fit in the coming Louqe Ghost S1. coming update: copper based DC-EVO design, more ports for inlet and outlets, maybe a better aesthetic external face.

格式
STEP / IGES
分类
Components、Computer、Hobby
标签
watercooling、pc、acrylic、custom、parts
数据更新
2026-11-08T04:44:49Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。