GrabCAD 模型信息
Ender 3 pro | Built-in electrical box · 模型 371676
Preface: This implementation is only suitable for the Ender 3 PRO and is not compatible with the Ender 3, as it uses a narrower bed beam and a different Y-axis motor mount. Description: This enclosure was developed based on the official Ender 3 printer build, incorporating changes from the Ender 3 Pro model. The enclosure serves as a housing for the power supply, controller, and any mini PC (with a clipper onboard). This ensures the electronics are located in one place and the center of mass is lower, which should theoretically result in less vibration. The enclosure's 90mm height was determined by the need to mount a stock monitor with an encoder on the front panel. Overall, the available space in the enclosure is more than sufficient to accommodate a 40mm-tall mini PC or any other nettop. The printer was planned to be equipped with a second Z-axis motor, so the rear covers were designed to be easily removed without removing any printer parts, allowing access to the rear compartment of the enclosure. I didn't have time to implement the project because I sold the printer first. However, I did manage to complete the modeling, where I took into account many details. Manufacturing: A metal laser cutting machine and a bending machine with a punch capable of producing a bending radius of 1 mm or close to it (0.2-0.3 mm) are required. The plan was to make all parts from 1.5 mm galvanized steel. The parts are fastened together with threaded rivets. Models of parts with mounting rivets include a version where the rivet holes are hexagonal; fitting the rivet in this hole prevents it from twisting. Gaps (1 mm - the height of the rivet) between riveted parts can be eliminated by printing spacers for them, resulting in a more airtight enclosure. Printer modification: The only modification required is to raise the tabletop from the crossbar by 7 mm - that is, the entire depth of the groove into which the crossbar is inserted. Essentially, the bottom plane of the crossbar needs to be aligned with the crossbar. This modification was made because the screws securing the covers to the tabletop itself could not be properly positioned.
- 格式
- STEP / IGES
- 分类
- Hobby
- 标签
- ender 3 pro、ender、electric box
- 数据更新
- 2026-11-07T01:46:15Z