GrabCAD 模型信息
Ender 3 Z-Axis Modification to 345mm for cheap · 模型 255536
I just modified my ender to print taller things! Replace both side profiles (400mm) 2040 v-nut with 2 new 500mm profiles. Don't forget to drill the two 4,5mm holes for the powersupply! Tap 5mm threads in the holes on top and bottom of the profiles. Print the Z-Axis Nut extender. Tap a 3mm thread in the holes. Remove the Z-nut, bolt it to the extender, then bolt the extender to the z-axis holder. It might be neccesery to grind the big hole in the middle with sandpaper to fit the z-nut properly. For detailed information refer https://github.com/Creality3DPrinting/Ender-3 If you can see, i changed the steppers earlier for better performance. But that is not absolutely necessary. Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 10% Filament_brand: Thumwan Filament_color: Yellow Filament_material: PLA
- 格式
- Rendering、STEP / IGES、STL、Other
- 分类
- 3D printing、Components、Miscellaneous
- 标签
- 未标注
- 数据更新
- 2026-10-07T17:59:22Z