GrabCAD 模型信息
filament keep dry box · 模型 255352
I use the boxes to hold the filament dry during printing. I can print PETG 24/7 without any problems. Without this box i could only print PETG for 24 hours until it was too wet. The following spool holders are fitting perfekt in the Box: https://grabcad.com/library/double-spool-holder-1 https://grabcad.com/library/prusa-mini-spool-holder-remix-1 If the filament is wet, it should be dried and then packed in this box to keep it dry. the box can't make it more dry. If you want the filament to stay dry for a long time, I recommend using silicate desiccant. With the colored silicate desiccant you can keep an eye on the condition even without a hygrometer. The silicate desiccant can lead to the formation of residues on the filament! To avoid a clogged nozzle. I recommend using a filament filter: https://grabcad.com/library/snap-on-filament-filter-oiler-less-overhangs-1 Print Settings Printer: Anycubic 4MAX (e3d Titan Aero) Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament_brand: doesn't matter Filament_color: doesn't matter Filament_material: PETG Post-Printing spool holder have to be glued in. Hygrometer_Halter-v2 have to be glued in (optinal) Pneumatikanschluss_innen-v2 needs a thread for the pneumatic connector # part list (printed) 2x Pneumatikanschluss_innen-v2 2x Pneumatikanschluss_aussen-v3 1x Hygrometer_Halter-v2 (optinal) # part list 1x IKEA 365+ box 103.930.64 (or similar) 1x IKEA 365+ cover 303.930.63 (or similar) 2x pneumatic connector PC4-01 or PC6-01 2x pneumatic connector closer/plug 1x Hygrometer (optinal) 1x desiccant # tools drillbit Ø10mm thread cutter M10x1 or G1/8 double sided tape License filament keep dry box by ProduktTester is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
- 格式
- Rendering、STL、STEP / IGES、SOLIDWORKS、Other
- 分类
- 3D printing
- 标签
- 未标注
- 数据更新
- 2026-09-19T22:01:39Z