GrabCAD 模型信息
Flap Hinge Bracket L/R – 5-Axis Fixture Concept (Op1 & Op2) | フラップヒンジ LR 2個どり治具構想 · 模型 386915
Fixture concept for an A7075 bracket modeled after an aircraft flap hinge, in mirrored L/R versions, machined from 85 x 85 x 110 mm saw-cut stock. - Op 1: L and R parts machined together on 5-axis self-centering vises mounted on an aluminum base plate. The toleranced hinge bore and slotted holes are finished in this setup. - Op 2: One L/R set completed at a time on an aluminum fixture block with stop pads, a locating bushing with retaining bolt, L-shaped side clamps, side stops and a riser. The pads are screwed on, so they are replaceable and can be shimmed individually. Files: Op 1 and Op 2 setup assemblies (STEP AP242, mm) All models are original. This is a design concept for reference; check strength, clearances and clamping forces for your own machine and conditions before use. 航空機のフラップヒンジを模したA7075製ブラケット(LR勝手違い)の治具構想です。素材は85×85×110ののこ刃切り出し材です。 ・1工程目:アルミ製ベースプレート上の5軸用センタリングバイスで、LRを同時に加工します。公差穴と長穴もこの工程で仕上げます。 ・2工程目:ストップパッド、位置決めブシュ(固定ボルト付き)、L字サイドクランプ、サイドストッパー、ライザーで構成したアルミ製治具で、LRを1セットずつ完成させます。パッドはねじ止めなので、交換やシムでの個別の高さ調整ができます。 すべてオリジナルモデルです。参考用の設計構想なので、ご使用の機械や条件に合わせて、強度・クリアランス・クランプ力を確認してください。
- 格式
- STEP / IGES
- 分类
- Aerospace、Fixtures、Machine design
- 标签
- fixture、jig、5-axis、cnc、machining、workholding、aerospace
- 数据更新
- 2026-11-18T15:16:50Z