GrabCAD 模型信息
Flow Control - Flow fuse - Fixed-orifice, flow fuse valve - Capacity: 60 L/min. | Cavity: T-5A (Model - FQEAXAN). · 模型 212112
Flow fuse cartridges are used to maintain the position of a hydraulic actuator in the event of a hose or line break. The valve allows flow to and from the actuator but closes instantly if flow from the actuator exceeds the setting of the valve. NOTE: Because the valve responds so rapidly, it is sensitive to any transient flow above the valve setting. Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting. Valve closes when flow from port 1 to port 2 exceeds the setting of the valve. Valve resets when pressures at port 1 and port 2 are equal. Flow setting should be at least 25% above maximum normal system flow. Customer must specify flow when ordering valve. These are spool type valves, therefore there is leakage. Some actuator drift may occur. Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP or /LH (see CONFIGURATION section). For further details, please see the Materials of Construction page under TECHNICAL RESOURCES. Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
- 格式
- PTC Creo Elements、STEP / IGES、Rendering、Other
- 分类
- Components、Industrial design、Machine design
- 标签
- mobilehydra、industrialautomation、valvetechnology、hydraulicsystem、hydraulicengineering、industrialhydraulics、hydrauliccontrols、fluidpower、hydraulicvalve、t5acavity、capacity60lmin、fqeaxan、flowfusevalve、fixedorifice、flowfuse、flowcontrol
- 数据更新
- 2026-10-28T13:02:49Z
