GrabCAD 模型信息
food dispenser(0) · 模型 355905
....here we have the first attempt to depict our food dispenser in all its diversity due to the size of the working memory, i can only show it schematically, fragmented, so to speak - the whole thing in parts only. it is not possible for me to show all groups with their individual parts here. to the food dispenser: we have a device here with a large number of interchangeable, automatically interchangeable lines. That means - the actual composition can change at any time - depending on the requirements! I have simply concentrated the choice on the baguette route here: - baguette-bread halves- become both bottom and top baked - the warm, fresh baguette is then filled - that means: we drive the individual lines off and get fresh there sliced placed on the baguette the lines: - above (1) is the die-cast production of our required packaging form - underneath (2) is a baking pan for schnitzel, backfissh, egg dishes - down there (3) is the baking section for our baguettes - there below (4) is the first cutting section for the lower support the baguette- a slice (!!) with a firm sauce mass - there below (5) is a cut for the second edition on the baguette - that would be a firm tomato sauce - Nothing is planned underneath (6): after the second edition the output form up to (2) and gets the main product a schnitzel, a breaded fish, an egg preparation. - then now we continue with the edition above the third edition: that means: the form of our baguette must be from move up (2) down to the corresponding top picks, to get conditions. - once this has been done - the baguette upper part must be put on in (3). - and that's it - the finished baguette goes whole up and gets (1) its cover put on there. - then the finished baguette moves all the way down and is spent! always six at a time. what sounds complicated here is simple and quite fast and implemented quickly. the well-known boiled ham press mold is required for the production of boiled ham, cheese and all firm sauces and is housed in a continuously circulating water bath tower. the cutting device for cutting the demoulded constructs from the boiling mold of the pressing mold is not included here! the die-cast mold and the translator are also missing here! so far everything works - despite endless attempts to permanently prevent me from doing everything - unfortunately this is still the case in the most massive way - by the German state of terror, quite well: e
- 格式
- STEP / IGES、Rendering
- 分类
- Construction、Industrial design、Machine design
- 标签
- 未标注
- 数据更新
- 2026-11-01T00:43:03Z