Fork Spacer 模型预览

GrabCAD 模型信息

Fork Spacer · 模型 404402

作者:Paige Evans

First, I started by making a line 150mm long and making a line 20mm tall and connecting another line to 60mm and making a circle that was 10 for the radius and connected that circle with a line on top and made another line 10mm. Next, I made the 2 circles in the center 30mm and 20mm and made sure they were 100mm apart. Then, I made sure the line connecting the two 30 radius circles that would be 70 degrees apart from the bottom line and made 2 arcs making it 30 for the radius. Then, I made the big circle, a perimeter circle to 300 and trimmed everything on the right side that needed to be trimmed and extruded it to 100mm, I changed my material to titanium and checked my mass to be perfect. Moving onto part 2, I started by making another circle around the one I already made and made a centerline and made one down to 4mm and made a line on the design and extrude cut it 20mm and did the same thing on the other side. Then I sketched what I need to extrude cut it so I made a line at the top left point to 25mm and made a horizontal line 150mm and a line straight down to 50mm and made a box so it connects in order to extrude cut it and afterwards I checked my mass to come out exactly what I needed it to be. Finally, part 3, I converted the entities and made them offset by 2mm and cut extrude it 10mm inwards and checked the mass and it was exactly 4601.32 grams.

格式
SOLIDWORKS、Rendering
分类
Industrial design、Machine design、Tech
标签
stc_cad_fs
数据更新
2026-09-12T17:16:22Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。