GrabCAD 模型信息
Formlabs Form 1+ Build Platform - Farm Lads Evolution · 模型 321237
This is a remix of Robert Silvers' Farm Lads build platform (thing # 3450124 on Thingiverse). This 3D printable build platform fits the Formlabs Form 1 and Form 1+ printers. Original build platforms are no longer available, but we won't let that stop us! BoM: QTY 1: Farm Lads Evolution Build Platform QTY 1: Farm Lads Evolution Knob for M8 nut QTY 1: M8-1.25 x 40mm hex bolt QTY 1: M8-1.25 nut QTY 1: Aluminum plate - 135mm (5.3 inch) x 135mm (5.3 inch) x 3mm (0.125 inch) Two-part Epoxy These parts are optimized to print with a 0.4mm nozzle, at a 0.3mm layer height, with 4 perimeters. I used 20% infill, but you could go higher if you wanted. Some holes purposely have a 0.3mm bridge in them to make printing without supports possible. When printed at a 0.3mm layer height, this bridge area will be one layer thick and will easily break away when a bolt is inserted into the hole. This is not a mistake! Features added: sloped top and sides to (hopefully) encourage resin to flow back into the vat, reduced material needed, Hex size and hole increased to accommodate a standard M8 bolt and nut instead of M7/0.25", and increased surface area for bonding the aluminum plate. This build plate is designed to have a 3mm (0.125 inch) thick piece of aluminum plate bonded to the bottom of it. I have used 2 part epoxy on the original Farm Lads build plate and that worked great. This is a remix of Robert Silvers' design, which can be found on Thingiverse (thing # 3450124).
- 格式
- STEP / IGES、STL、Rendering
- 分类
- 3D printing、Industrial design、Tools
- 标签
- formlabs、form、form1、build、platform、buildplate、plate
- 数据更新
- 2026-09-27T19:49:35Z