GrabCAD 模型信息
Garden Summer Pavilion · 模型 408515
Summer soon... Nice days for shashlik! It's pretty simple and even in something, if I may say so, a primitive by design pavilion, and it can be recommended for the building with their hands, even those who have no experience of such projects. Vertical racks are fixed by using strapping and mauerlats. Floors are laid so that a gap remained between the boards, in the 3-5 mm, which will compensate for the increased parity in autumn-winter period, and will not form puddles on the floor. Roof rafters rest on ridge beam, which facilitates their installation alone. After installing the above they are reinforced by plates of plywood on both sides. This is to remove part of the load from the ridge beam. So that you don't have to subsequently attach roof rafters from below, it is better to make a continuous purlin roof, made of planed boards. The only responsible thing of the construction pavilion, is the creation of spikes on the ends of the racks and a fetch nests in mauerlats. These operations are best done in advance. The spikes on the ends of the racks are pretty simple: stick to the desired distance from the top of the rack 40 mm, and from all sides make incisions circular saw and then accurately to cut off all unnecessary manual hacksaw. Nests under the spikes is the easiest way to do as follows: select the appropriate size drill bit with a diameter of 40 mm down and drill the hole to the required depth, all unnecessary delete using a chisel.
- 格式
- SOLIDWORKS、Rendering
- 分类
- Architecture、Industrial design
- 标签
- garden、pavilion、summer
- 数据更新
- 2026-11-03T10:19:04Z