Generate QuadCopter Challenge 模型预览

GrabCAD 模型信息

Generate QuadCopter Challenge · 模型 336541

作者:Charles Hatch

Initial step file provided was first shaped in Autodesk Fusion 360 followed by a very basic static FEA. The design focus was to be strong with minimal use of material while providing enough surface area for the adhesive Velcro attached to the components. The design was then exported to Generate which eliminated most of the material. Load cases were applied on the motor bases and on the top of the frame. .48 g of thrust was expected, and the frame was designed based on a factor of safety of 2. The side slots are for an additional Velcro strap for the payload if needed. When loaded into Repetier host, STL repair was suggested. The repair service suggested was https://tools3d.azurewebsites.net/ which I have used multiple times for various STL files. The repaired file is also attached. From Repetier Host: Volume: ~5.8127 cm^3 Assumed Density: 1.04 g/cm^3 Source: http://modfab.com.au/filament-plastics-information/ Mass: 6.045 g Any and all feedback is appreciated. Link to Generate Scenario: https://generate.frustum.com/#/workspace/771/scenario/2119

格式
STL、Rendering
分类
3D printing、Aerospace
标签
topopquad
数据更新
2026-10-30T04:13:47Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。