GrabCAD 模型信息
Grundfos Challenge Ratchet Gearbox · 模型 386660
This is a ratchet-based gearbox, which does not seem like an obvious choice for this challenge, however it has several advantages. Despite being a ratcheting system which essentially results in a stepped motion rather than a smooth cyclical output, for such low ratios this might not be an issue. The mechanism can work in both directions, and locks the cogs in place at every rotation in order to reduce hysteresis. Its very compact. With only two stages, it can achieve a reduction ratio of 500:1, provided the first set of cogs gave 25 teeth and the second 20 (this model has 20 teeth in all cogs, which is an error easily rectified given more time!). Very low wear. Despite all the moving parts, when the load is being transferred there is no slip movement, unlike worm drives or spur gears which are constantly rubbing. High load transfer area. Unlike spur gears and similar where the contact areas for load transfer are very small, in the ratchet mechanism the entire tooth area is engaged during the entire load transfer process. Low lubrication requirements. Since there is very little load on moving surfaces, and none of the surfaces are subject to the full load while rotating, minimal lubrication should last for a considerable period. Ease of manufacture. The entire mechanism can be produced from stamped parts, since the precision achieved by CNC is not required. Even the cage can be produced from one stamping and sheet folded. This makes it easy to manufacture and very low cost. Ease of assembly. The entire mechanism is designed to be pre-assembled then screwed into place with four screws.
- 格式
- STEP / IGES、Rendering、Other
- 分类
- Components、Industrial design、Machine design
- 标签
- grundfos、challenge、gearbox、ratchet、grundfoschallenge2019
- 数据更新
- 2026-11-17T19:41:05Z