GrabCAD 模型信息
Hager 40×60 Cable Trunking Wall Trim – Snap-Fit Cover Plate for Wall Penetrations · 模型 45081
Hager 40×60 Trunking Accessories – 3D Printable Series Hager 40×60 Cable Trunking Wall Trim – Snap-Fit Cover Plate for Wall Penetrations (3D Printable, No Supports) A 3D-printable trim element designed to cover wall openings where 40 × 60 mm Hager cable trunking passes through a wall. The part provides a clean visual finish while remaining tolerant to imperfect trunking cuts and irregular wall openings. The design uses the internal geometry typically used to retain the trunking lid, allowing the trim to snap onto the trunking body without additional fasteners. Main features Compatible with 40 × 60 mm Hager cable trunking 20 mm flange covering irregular wall openings Snap-fit attachment using the trunking lid retention geometry 5 mm lid overlap inside the trim element (reduces the need for precise trunking and lid cuts) FDM-friendly geometry Designed to print without supports Application The component is intended for installations where cable trunking passes through a wall and the resulting opening requires a clean finish. The flange masks the wall cut while maintaining access to the trunking lid. 3D printing Recommended printing method: FDM / FFF printing No support structures required Standard layer heights and nozzle sizes work well For installations near electrical wiring, filaments with flame-retardant or non-flame-propagating properties are recommended. Educational purpose and regulatory note This model is shared primarily for educational and experimental purposes. Electrical installations are subject to local regulations, safety standards, and professional installation practices, which vary by jurisdiction. Any practical use of this model should be evaluated for compliance with the applicable electrical codes and safety requirements.
- 格式
- Text file、STL、Rendering、Fusion 360
- 分类
- 3D printing、Electrical、Tech
- 标签
- 3d-print、cable
- 数据更新
- 2026-10-06T06:16:34Z
