handle 模型预览

GrabCAD 模型信息

handle · 模型 387595

作者:David "Scott" Deryck

handle for kurt style vise... sorry I only drew what I needed to make the handle, full 3d model later later came later... close enough for now. I usually bore or ream the hole .3745" and press a 3/8 dowel pin in I used some 3/4" stock to make this part, in the first op I used talon grip style vise jaws (modeled up and shared here) so I could get below the .600" thickness. If I were using a standard vise I might make the part finish at .55 or .575 to get a little clearance between vise jaw and the cutter. and... I made the larger end with flats so I could face it off in second op with standard vise jaws by using some 5/16 keys on both side of the small end. No soft jaw needed. I'm big on ease of manufacturing.

格式
STEP / IGES
分类
Fixtures、Machine design、Tools
标签
visehandle
数据更新
2026-11-08T06:57:25Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。