HDD Pi Case V1 模型预览

GrabCAD 模型信息

HDD Pi Case V1 · 模型 323456

作者:Anson Biggs

Get the Full write up on my blog. http://blog.ansonbiggs.com/ This Raspberry Pi case is designed to fit into a standard 3.5in hard drive slot. It works well with tool less mounting systems, but I also added the ability for threaded nuts to be dropped in which work great as well and make this compatible with anything that a standard hard drive fit into. The nuts that I built around are the [McMaster-Carr 90480a007](https://www.mcmaster.com/#90480a007/) This cost me $8.32 for 100 nuts delivered to my door but I am sure a local hardware store would have the same thing far cheaper. Print Settings **Printer Brand:** Creality **Printer:** Ender 3 **Rafts:** No **Supports:** Yes **Resolution:** 0.40 mm **Infill:** 15% **Notes:** I have printed this part a few times and you can get away with doing no supports you just end up with some long bridges. I would advise against supports inside where the nuts go because it is nearly impossible to get those supports out correctly. How I Designed This This was my first project using Fusion 360, and my first project built from the ground up for 3D printing. I started by building a profile sketch or “master sketch” of an HDD with the placement of the screw holes. Then I decided to make a rough Raspberry Pi model since I plan on many 3D printed projects for the Pi it would be easier to have a digital copy. Version 2 will be worked on soon since now I have experience with 3D printing and I know that things like the long supports that require long bridges are a big no no. Ill also probable change the positioning of the Pi to be more in the middle. Any other feedback would be greatly appreciated. ![](https://cdn.thingiverse.com/assets/2a/11/ce/33/5a/2018-07-26_23-09-29.gif)

格式
STEP / IGES、STL、Rendering
分类
3D printing、Electrical、Hobby
标签
computer、hard_drive、mcmaster-carr、raspberry_pi、raspberry_pi_3、raspberry_pi_case
数据更新
2026-10-01T11:16:06Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。