GrabCAD 模型信息
Hemera Extruder Mount for Voron · 模型 175890
Hemera Bowden Extruder mount for Voron V0. Compatible for both Voron V0 and Voron V0.1 3D Printer Slicer Setting: 1. Infill: 40% 2. Infill Pattern: Grid, Gyroid, Honeycomb, Triangle or Cubic 3. Layer Height: 0.2 mm 4. Extrusion Width: Forced 0.4 mm 5. Wall Count: Minimum 4 6. Solid Top/Bottom Layers: Minimum 5 BOM 1. M3*12 - 2 2. M3*8 - 4 3. Hemera Mount - 1 Installation Guide Step 1: Screw Hemera to the mount using M3*8 screws (for the orientation of the hemera refer the images) Caution: Do not over tighten the screws, high risk of chipping off of the mount. Step 2: Install the mount on the Voron V0 using M3*12 screws. Note: No external modification required on the acrylic plate of the Voron V0. Step 3: Flex your printer. (please do not take it literally) https://3rdeyelabs.io
- 格式
- Rendering、STEP / IGES、STL、Fusion 360
- 分类
- 3D printing、Fixtures、Hobby
- 标签
- abs、3rdeyelabs、design、voron、3dprinter、fdm、opensource、hemera、voronv0-1、voronv0、extruder、mount、3dprinting
- 数据更新
- 2026-10-13T07:20:28Z
