GrabCAD 模型信息
Honeycomb Rings · 模型 207157
Four rings with a different honeycomb structure, created "Just For Fun". Version A: Each 24 honeycombs are radial placed in two rows in axial direction, so that this ring has completely 48 pieces. Each row contents 24 honeycombs, exactly as a day has hours. Two rings - with each 24 prismatic components - are placed at both axial ends. The inner diameter of the ring is 18.5 mm and the outer diameter is 21 mm. The width of the ring is approx. 6.25 mm. Version B: Each 15 honeycombs are radial placed in two rows in axial direction, so that this ring has completely 30 pieces. Each row contents 15 honeycombs, whereby the radial pitch is 24 angular degrees. Two rings - with each 15 components (half a honeycomb) - are placed at both axial ends. The inner diameter of the ring is 18.5 mm and the outer diameter is 21 mm. The width of the ring is approx. 3.8 mm. Version C: Similar to Version A, but only one row with 24 honeycombs. The width of the ring is approx. 3.85 mm. Version D: Similar to Version C, but both outer rings are 24 times half a honeycomb. The width of the ring is approx. 4.85 mm. Soldering points and - areas are not modeled. The interesting description of the number 24 is available in german language only. The models are available in following data formats: STEP files (.stp) and all native files (.prt) and (.asm) together in (.7z) folders, for users of »PTC Creo Parametric 2.0«
- 格式
- STEP / IGES、Rendering、Other
- 分类
- Jewellery、Just for fun
- 标签
- 未标注
- 数据更新
- 2026-10-06T16:02:00Z
